Before you start checking your software:Īre You Getting Audio From Other Applications On Your Computer? If you’re getting playback but can’t get an input to record we’ll cover that later. Here are the points to cover if you’re not getting playback. It’s frustrating when you hit play only to be greeted by silence.
If that’s correct then as a quick solution setting your IO settings to default will probably fix things. If you are, then check the Playback Engine in Pro Tools. Make sure you’re getting audio from other software like your web browser. If Pro Tools isn’t giving you any sound don’t immediately assume it's the software, check your hardware is all connected, switched on and turned up. The side positioning makes it easier to access the 3.5mm port without having to reach around to the back of the iMac, which is particularly tricky if the iMac is up against a wall.A very common cause of confusion for users of Pro Tools is not knowing what to do when you hit play only to be greeted by silence. There are numerous practical benefits to moving the headphone jack as well. For this reason, Apple was likely forced to move the headphone jack to the side of the iMac with this redesign. Apple says the new iMac measures in at 11.5mm thick, and as first spotted by Marques Brownlee, this means the iMac is too thin to accommodate a headphone jack on the back.Īs MKBHD explains, the typical headphone jack is 14mm deep, so there is physically just not enough room to accommodate a headphone jack. One of the major design changes with the new iMac is just how thin it is on the side. One of the more subtle changes is that the headphone jack has been relocated from the back of the iMac to the side, and as it turns out, there’s a specific reason for that. The new M1 iMac features an all-new design with seven different colors from which to choose.
0 kommentar(er)
